Help for BrailleX EL40s # Terminal Parameters: identification = 85 terminal = "BrailleX EL40s" protocolrevision = 1 helpfile = "el40s" displaysize = 40 hasbar = 0 0 1 1 # Modifier Keys: modifier = switch left rear modifier = switch left front modifier = switch right rear modifier = switch right front modifier = key left rear modifier = key left front modifier = key right rear modifier = key right front modifier = bar up1 modifier = bar down1 modifier = bar left1 modifier = bar right1 modifier = bar up2 modifier = bar down2 modifier = bar left2 modifier = bar right2 # Command Definitions: CMD_LNUP = bar up1 # go up one line CMD_LNDN = bar down1 # go down one line CMD_TOP = bar up2 # go to top line CMD_BOT = bar down2 # go to bottom line CMD_FWINLT = bar left1 # go left one window CMD_FWINRT = bar right1 # go right one window CMD_LNBEG = bar left2 # go to beginning of line CMD_LNEND = bar right2 # go to end of line CMD_PRDIFLN = switch left rear and bar up1 # go up to nearest line with different content CMD_NXDIFLN = switch left rear and bar down1 # go down to nearest line with different content CMD_ATTRUP = switch left rear and bar up2 # go up to nearest line with different highlighting CMD_ATTRDN = switch left rear and bar down2 # go down to nearest line with different highlighting CMD_PRPROMPT = switch left rear and bar left1 # go up to previous command prompt CMD_NXPROMPT = switch left rear and bar right1 # go down to next command prompt CMD_PRPGRPH = switch left rear and bar left2 # go up to last line of previous paragraph CMD_NXPGRPH = switch left rear and bar right2 # go down to first line of next paragraph KEY_CURSOR_UP = switch right rear and bar up1 # simulate pressing the cursor-up key KEY_CURSOR_DOWN = switch right rear and bar down1 # simulate pressing the cursor-down key KEY_PAGE_UP = switch right rear and bar up2 # simulate pressing the page-up key KEY_PAGE_DOWN = switch right rear and bar down2 # simulate pressing the page-down key CMD_FWINLT route = switch right rear and bar left1 # go left one window and route cursor CMD_FWINRT route = switch right rear and bar right1 # go right one window and route cursor CMD_LNBEG route = switch right rear and bar left2 # go to beginning of line and route cursor CMD_LNEND route = switch right rear and bar right2 # go to end of line and route cursor KEY_CURSOR_UP = switch left rear and switch right rear and bar up1 # simulate pressing the cursor-up key KEY_CURSOR_DOWN = switch left rear and switch right rear and bar down1 # simulate pressing the cursor-down key KEY_PAGE_UP = switch left rear and switch right rear and bar up2 # simulate pressing the page-up key KEY_PAGE_DOWN = switch left rear and switch right rear and bar down2 # simulate pressing the page-down key KEY_CURSOR_LEFT = switch left rear and switch right rear and bar left1 # simulate pressing the cursor-left key KEY_CURSOR_RIGHT = switch left rear and switch right rear and bar right1 # simulate pressing the cursor-right key KEY_HOME = switch left rear and switch right rear and bar left2 # simulate pressing the home key KEY_END = switch left rear and switch right rear and bar right2 # simulate pressing the end key CMD_PRSEARCH = switch left front and bar up1 # search backward for content of cut buffer CMD_NXSEARCH = switch left front and bar down1 # search forward for content of cut buffer CMD_HELP = switch left front and bar up2 # enter/leave help display CMD_LEARN = switch left front and bar down2 # enter/leave command learn mode CMD_CHRLT = switch left front and bar left1 # go left one character CMD_CHRRT = switch left front and bar right1 # go right one character CMD_HWINLT = switch left front and bar left2 # go left half a window CMD_HWINRT = switch left front and bar right2 # go right half a window CMD_MENU_PREV_ITEM = switch right front and bar up1 # go to previous item in menu CMD_MENU_NEXT_ITEM = switch right front and bar down1 # go to next item in menu CMD_MENU_FIRST_ITEM = switch right front and bar up2 # go to first item in menu CMD_MENU_LAST_ITEM = switch right front and bar down2 # go to last item in menu CMD_MENU_PREV_SETTING = switch right front and bar left1 # change current item in menu to previous choice CMD_MENU_NEXT_SETTING = switch right front and bar right1 # change current item in menu to next choice CMD_PREFLOAD = switch right front and bar left2 # restore saved preferences CMD_PREFSAVE = switch right front and bar right2 # save current preferences CMD_BACK = key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = key left front # go to cursor CMD_HELP = key right rear # enter/leave help display CMD_LEARN = key right front # enter/leave command learn mode CMD_SIXDOTS = key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = key left front and bar up2 # reinitialize braille driver CMD_FREEZE = key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = key left front and bar left1 # enter/leave status display CMD_PREFMENU = key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = key left front and bar left2 # restore saved preferences CMD_PREFSAVE = key left front and bar right2 # save current preferences CMD_SAY_ABOVE = key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = key right rear and bar down2 # decrease speech volume CMD_MUTE = key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = key right rear and bar right1 # speak current line CMD_SAY_SLOWER = key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = key right rear and bar right2 # increase speech rate CMD_SPKHOME = key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = key right front and bar down2 # CMD_SKPIDLNS = key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = routing1 # bring cursor to character BLK_PRINDENT = bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = bar down2 and routing1 # describe character BLK_CUTAPPEND = bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = routing2 # describe character BLK_GOTOLINE on = status2 # go to line - set on CMD_BACK = switch right rear and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch right rear and key left front # go to cursor CMD_HELP = switch right rear and key right rear # enter/leave help display CMD_LEARN = switch right rear and key right front # enter/leave command learn mode CMD_SIXDOTS = switch right rear and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch right rear and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch right rear and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch right rear and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch right rear and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch right rear and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch right rear and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch right rear and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch right rear and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch right rear and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch right rear and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch right rear and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch right rear and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch right rear and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch right rear and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch right rear and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch right rear and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch right rear and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch right rear and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch right rear and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch right rear and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch right rear and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch right rear and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch right rear and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch right rear and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch right rear and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch right rear and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch right rear and key right front and bar down2 # CMD_SKPIDLNS = switch right rear and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch right rear and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch right rear and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch right rear and routing1 # bring cursor to character BLK_PRINDENT = switch right rear and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch right rear and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch right rear and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch right rear and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch right rear and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch right rear and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch right rear and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch right rear and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch right rear and routing2 # describe character BLK_GOTOLINE on = switch right rear and status2 # go to line - set on CMD_BACK = switch right front and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch right front and key left front # go to cursor CMD_HELP = switch right front and key right rear # enter/leave help display CMD_LEARN = switch right front and key right front # enter/leave command learn mode CMD_SIXDOTS = switch right front and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch right front and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch right front and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch right front and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch right front and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch right front and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch right front and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch right front and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch right front and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch right front and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch right front and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch right front and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch right front and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch right front and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch right front and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch right front and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch right front and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch right front and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch right front and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch right front and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch right front and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch right front and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch right front and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch right front and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch right front and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch right front and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch right front and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch right front and key right front and bar down2 # CMD_SKPIDLNS = switch right front and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch right front and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch right front and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch right front and routing1 # bring cursor to character BLK_PRINDENT = switch right front and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch right front and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch right front and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch right front and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch right front and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch right front and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch right front and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch right front and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch right front and routing2 # describe character BLK_GOTOLINE on = switch right front and status2 # go to line - set on CMD_BACK = switch left rear and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch left rear and key left front # go to cursor CMD_HELP = switch left rear and key right rear # enter/leave help display CMD_LEARN = switch left rear and key right front # enter/leave command learn mode CMD_SIXDOTS = switch left rear and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch left rear and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch left rear and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch left rear and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch left rear and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch left rear and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch left rear and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch left rear and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch left rear and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch left rear and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch left rear and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch left rear and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch left rear and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch left rear and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch left rear and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch left rear and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch left rear and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch left rear and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch left rear and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch left rear and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch left rear and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch left rear and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch left rear and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch left rear and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch left rear and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch left rear and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch left rear and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch left rear and key right front and bar down2 # CMD_SKPIDLNS = switch left rear and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch left rear and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch left rear and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch left rear and routing1 # bring cursor to character BLK_PRINDENT = switch left rear and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch left rear and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch left rear and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch left rear and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch left rear and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch left rear and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch left rear and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch left rear and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch left rear and routing2 # describe character BLK_GOTOLINE on = switch left rear and status2 # go to line - set on CMD_BACK = switch left rear and switch right rear and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch left rear and switch right rear and key left front # go to cursor CMD_HELP = switch left rear and switch right rear and key right rear # enter/leave help display CMD_LEARN = switch left rear and switch right rear and key right front # enter/leave command learn mode CMD_SIXDOTS = switch left rear and switch right rear and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch left rear and switch right rear and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch left rear and switch right rear and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch left rear and switch right rear and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch left rear and switch right rear and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch left rear and switch right rear and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch left rear and switch right rear and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch left rear and switch right rear and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch left rear and switch right rear and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch left rear and switch right rear and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch left rear and switch right rear and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch left rear and switch right rear and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch left rear and switch right rear and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch left rear and switch right rear and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch left rear and switch right rear and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch left rear and switch right rear and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch left rear and switch right rear and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch left rear and switch right rear and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch left rear and switch right rear and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch left rear and switch right rear and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch left rear and switch right rear and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch left rear and switch right rear and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch left rear and switch right rear and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch left rear and switch right rear and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch left rear and switch right rear and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch left rear and switch right rear and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch left rear and switch right rear and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch left rear and switch right rear and key right front and bar down2 # CMD_SKPIDLNS = switch left rear and switch right rear and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch left rear and switch right rear and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch left rear and switch right rear and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch left rear and switch right rear and routing1 # bring cursor to character BLK_PRINDENT = switch left rear and switch right rear and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch left rear and switch right rear and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch left rear and switch right rear and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch left rear and switch right rear and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch left rear and switch right rear and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch left rear and switch right rear and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch left rear and switch right rear and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch left rear and switch right rear and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch left rear and switch right rear and routing2 # describe character BLK_GOTOLINE on = switch left rear and switch right rear and status2 # go to line - set on CMD_BACK = switch left rear and switch right front and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch left rear and switch right front and key left front # go to cursor CMD_HELP = switch left rear and switch right front and key right rear # enter/leave help display CMD_LEARN = switch left rear and switch right front and key right front # enter/leave command learn mode CMD_SIXDOTS = switch left rear and switch right front and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch left rear and switch right front and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch left rear and switch right front and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch left rear and switch right front and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch left rear and switch right front and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch left rear and switch right front and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch left rear and switch right front and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch left rear and switch right front and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch left rear and switch right front and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch left rear and switch right front and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch left rear and switch right front and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch left rear and switch right front and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch left rear and switch right front and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch left rear and switch right front and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch left rear and switch right front and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch left rear and switch right front and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch left rear and switch right front and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch left rear and switch right front and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch left rear and switch right front and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch left rear and switch right front and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch left rear and switch right front and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch left rear and switch right front and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch left rear and switch right front and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch left rear and switch right front and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch left rear and switch right front and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch left rear and switch right front and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch left rear and switch right front and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch left rear and switch right front and key right front and bar down2 # CMD_SKPIDLNS = switch left rear and switch right front and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch left rear and switch right front and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch left rear and switch right front and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch left rear and switch right front and routing1 # bring cursor to character BLK_PRINDENT = switch left rear and switch right front and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch left rear and switch right front and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch left rear and switch right front and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch left rear and switch right front and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch left rear and switch right front and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch left rear and switch right front and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch left rear and switch right front and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch left rear and switch right front and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch left rear and switch right front and routing2 # describe character BLK_GOTOLINE on = switch left rear and switch right front and status2 # go to line - set on CMD_BACK = switch left front and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch left front and key left front # go to cursor CMD_HELP = switch left front and key right rear # enter/leave help display CMD_LEARN = switch left front and key right front # enter/leave command learn mode CMD_SIXDOTS = switch left front and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch left front and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch left front and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch left front and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch left front and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch left front and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch left front and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch left front and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch left front and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch left front and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch left front and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch left front and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch left front and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch left front and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch left front and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch left front and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch left front and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch left front and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch left front and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch left front and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch left front and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch left front and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch left front and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch left front and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch left front and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch left front and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch left front and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch left front and key right front and bar down2 # CMD_SKPIDLNS = switch left front and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch left front and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch left front and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch left front and routing1 # bring cursor to character BLK_PRINDENT = switch left front and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch left front and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch left front and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch left front and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch left front and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch left front and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch left front and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch left front and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch left front and routing2 # describe character BLK_GOTOLINE on = switch left front and status2 # go to line - set on CMD_BACK = switch left front and switch right rear and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch left front and switch right rear and key left front # go to cursor CMD_HELP = switch left front and switch right rear and key right rear # enter/leave help display CMD_LEARN = switch left front and switch right rear and key right front # enter/leave command learn mode CMD_SIXDOTS = switch left front and switch right rear and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch left front and switch right rear and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch left front and switch right rear and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch left front and switch right rear and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch left front and switch right rear and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch left front and switch right rear and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch left front and switch right rear and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch left front and switch right rear and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch left front and switch right rear and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch left front and switch right rear and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch left front and switch right rear and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch left front and switch right rear and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch left front and switch right rear and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch left front and switch right rear and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch left front and switch right rear and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch left front and switch right rear and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch left front and switch right rear and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch left front and switch right rear and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch left front and switch right rear and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch left front and switch right rear and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch left front and switch right rear and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch left front and switch right rear and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch left front and switch right rear and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch left front and switch right rear and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch left front and switch right rear and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch left front and switch right rear and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch left front and switch right rear and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch left front and switch right rear and key right front and bar down2 # CMD_SKPIDLNS = switch left front and switch right rear and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch left front and switch right rear and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch left front and switch right rear and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch left front and switch right rear and routing1 # bring cursor to character BLK_PRINDENT = switch left front and switch right rear and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch left front and switch right rear and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch left front and switch right rear and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch left front and switch right rear and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch left front and switch right rear and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch left front and switch right rear and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch left front and switch right rear and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch left front and switch right rear and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch left front and switch right rear and routing2 # describe character BLK_GOTOLINE on = switch left front and switch right rear and status2 # go to line - set on CMD_BACK = switch left front and switch right front and key left rear # go back (undo unexpected cursor tracking motion) CMD_HOME = switch left front and switch right front and key left front # go to cursor CMD_HELP = switch left front and switch right front and key right rear # enter/leave help display CMD_LEARN = switch left front and switch right front and key right front # enter/leave command learn mode CMD_SIXDOTS = switch left front and switch right front and key left rear and bar up1 # toggle text style 6-dot/8-dot CMD_PASTE = switch left front and switch right front and key left rear and bar down1 # insert cut buffer at cursor CMD_CAPBLINK = switch left front and switch right front and key left rear and bar up2 # toggle capital letter blinking on/off CMD_CSRJMP_VERT = switch left front and switch right front and key left rear and bar down2 # bring cursor to line (no horizontal motion) CMD_DISPMD = switch left front and switch right front and key left rear and bar left1 # toggle display mode attributes/text CMD_CSRTRK = switch left front and switch right front and key left rear and bar right1 # toggle cursor tracking on/off CMD_ATTRVIS = switch left front and switch right front and key left rear and bar left2 # toggle attribute underlining on/off CMD_CSRVIS = switch left front and switch right front and key left rear and bar right2 # toggle cursor visibility on/off CMD_AUTOSPEAK = switch left front and switch right front and key left front and bar up1 # toggle autospeak on/off CMD_AUTOREPEAT = switch left front and switch right front and key left front and bar down1 # toggle autorepeat on/off CMD_RESTARTBRL = switch left front and switch right front and key left front and bar up2 # reinitialize braille driver CMD_FREEZE = switch left front and switch right front and key left front and bar down2 # toggle screen mode frozen/live CMD_INFO = switch left front and switch right front and key left front and bar left1 # enter/leave status display CMD_PREFMENU = switch left front and switch right front and key left front and bar right1 # enter/leave preferences menu CMD_PREFLOAD = switch left front and switch right front and key left front and bar left2 # restore saved preferences CMD_PREFSAVE = switch left front and switch right front and key left front and bar right2 # save current preferences CMD_SAY_ABOVE = switch left front and switch right front and key right rear and bar up1 # speak from top of screen through current line CMD_SAY_BELOW = switch left front and switch right front and key right rear and bar down1 # speak from current line through bottom of screen CMD_SAY_LOUDER = switch left front and switch right front and key right rear and bar up2 # increase speech volume CMD_SAY_SOFTER = switch left front and switch right front and key right rear and bar down2 # decrease speech volume CMD_MUTE = switch left front and switch right front and key right rear and bar left1 # stop speaking immediately CMD_SAY_LINE = switch left front and switch right front and key right rear and bar right1 # speak current line CMD_SAY_SLOWER = switch left front and switch right front and key right rear and bar left2 # decrease speech rate CMD_SAY_FASTER = switch left front and switch right front and key right rear and bar right2 # increase speech rate CMD_SPKHOME = switch left front and switch right front and key right front and bar up1 # go to current (most recent) speech position CMD_TUNES = switch left front and switch right front and key right front and bar down1 # toggle alert tunes on/off CMD_RESTARTSPEECH = switch left front and switch right front and key right front and bar up2 # reinitialize speech driver CMD_SWSIM_BQ = switch left front and switch right front and key right front and bar down2 # CMD_SKPIDLNS = switch left front and switch right front and key right front and bar left1 # toggle skipping of lines with identical content on/off CMD_SKPBLNKWINS = switch left front and switch right front and key right front and bar right1 # toggle skipping of blank windows on/off CMD_SLIDEWIN = switch left front and switch right front and key right front and bar right2 # toggle sliding window on/off BLK_ROUTE = switch left front and switch right front and routing1 # bring cursor to character BLK_PRINDENT = switch left front and switch right front and bar up1 and routing1 # go up to nearest line without greater indent BLK_NXINDENT = switch left front and switch right front and bar down1 and routing1 # go down to nearest line without greater indent BLK_SETLEFT = switch left front and switch right front and bar up2 and routing1 # position left end of window at character BLK_DESCCHAR = switch left front and switch right front and bar down2 and routing1 # describe character BLK_CUTAPPEND = switch left front and switch right front and bar left1 and routing1 # append to existing cut buffer from character BLK_CUTLINE = switch left front and switch right front and bar right1 and routing1 # linear cut to character BLK_CUTBEGIN = switch left front and switch right front and bar left2 and routing1 # start new cut buffer at character BLK_CUTRECT = switch left front and switch right front and bar right2 and routing1 # rectangular cut to character BLK_DESCCHAR = switch left front and switch right front and routing2 # describe character BLK_GOTOLINE on = switch left front and switch right front and status2 # go to line - set on CMD_SWSIM_LC = key left front and key right front and bar up1 # CMD_SWSIM_RC = key left front and key right front and bar down1 # CMD_SWSIM_BQ = key left front and key right front and bar up2 # CMD_SWSIM_BC = key left front and key right front and bar down2 # CMD_SWSIM_LR = key left front and key right front and bar left1 # CMD_SWSIM_RR = key left front and key right front and bar right1 # CMD_SWSIM_LF = key left front and key right front and bar left2 # CMD_SWSIM_RF = key left front and key right front and bar right2 # CMD_SWSIM_LC = switch right rear and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch right rear and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch right rear and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch right rear and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch right rear and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch right rear and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch right rear and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch right rear and key left front and key right front and bar right2 # CMD_SWSIM_LC = switch right front and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch right front and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch right front and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch right front and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch right front and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch right front and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch right front and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch right front and key left front and key right front and bar right2 # CMD_SWSIM_LC = switch left rear and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch left rear and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch left rear and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch left rear and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch left rear and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch left rear and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch left rear and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch left rear and key left front and key right front and bar right2 # CMD_SWSIM_LC = switch left rear and switch right rear and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch left rear and switch right rear and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch left rear and switch right rear and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch left rear and switch right rear and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch left rear and switch right rear and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch left rear and switch right rear and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch left rear and switch right rear and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch left rear and switch right rear and key left front and key right front and bar right2 # CMD_SWSIM_LC = switch left rear and switch right front and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch left rear and switch right front and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch left rear and switch right front and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch left rear and switch right front and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch left rear and switch right front and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch left rear and switch right front and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch left rear and switch right front and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch left rear and switch right front and key left front and key right front and bar right2 # CMD_SWSIM_LC = switch left front and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch left front and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch left front and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch left front and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch left front and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch left front and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch left front and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch left front and key left front and key right front and bar right2 # CMD_SWSIM_LC = switch left front and switch right rear and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch left front and switch right rear and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch left front and switch right rear and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch left front and switch right rear and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch left front and switch right rear and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch left front and switch right rear and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch left front and switch right rear and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch left front and switch right rear and key left front and key right front and bar right2 # CMD_SWSIM_LC = switch left front and switch right front and key left front and key right front and bar up1 # CMD_SWSIM_RC = switch left front and switch right front and key left front and key right front and bar down1 # CMD_SWSIM_BQ = switch left front and switch right front and key left front and key right front and bar up2 # CMD_SWSIM_BC = switch left front and switch right front and key left front and key right front and bar down2 # CMD_SWSIM_LR = switch left front and switch right front and key left front and key right front and bar left1 # CMD_SWSIM_RR = switch left front and switch right front and key left front and key right front and bar right1 # CMD_SWSIM_LF = switch left front and switch right front and key left front and key right front and bar left2 # CMD_SWSIM_RF = switch left front and switch right front and key left front and key right front and bar right2 #